Open Innovation

Partnerships between technology-based start-ups and established firms: making them work

2011-10-30T16:50:00.001Z

In my last post, the issue of how partnerships with start-ups could help large Japanese ICT firms cope with the fact that their industry is moving from a hardware to a software focus was discussed. I thought it might be helpful to give a summary of the outputs of some research we did on the general topic of managing partnerships between high-tech start-ups and larger, older firms.

Within an open innovation environment start-ups can be an important source of ideas for larger companies. Technology-based start-ups typically lack the strategic and operational rigidities that can stifle innovation in established firms. On the other hand, start-ups have limited resources and often struggle to access the complementary assets they need to get their ideas to market. Bringing together start-ups and established firms in mutually beneficial partnerships seems an obvious solution.
Research shows that making such partnerships work can be problematic. However, there are ways to increase the chances of success. Here we indicate some of the problems that can arise – and some possible ways to avoid them. More information on this topic can be found at www.managingpartnerships.net

The large company’s point of view…

IP and NDAs

Start-ups may be reluctant to reveal details of their technology without a non-disclosure agreement (NDA) fearing their intellectual property may be appropriated. They may fail to see that the large company could already have its own IP in this area.

Risk of brand abuse

Large firms may fear that the start-ups may use the partner’s brand in inappropriate ways in pursuit of commercial credibility. The following quote shows an example of a nightmare scenario for a large firm: “After we had signed a deal with a start-up, we gave them sight of our confidential technology roadmap. They then went off and talked about this in a press release!” (Large firm Technology Manager)

Technology or ready-for-market solution?

Start-ups often perceive their role is to provide a technology to be incorporated into a large firm’s product. The large firm on the other hand may want a ready-for-market solution. This gap can be quite significant and start-ups often do not appreciate the time and cost involved in moving from technology demonstrator to fully supported product.

Financial stability

Start-ups sometimes fail to understand a large firm’s need for due-diligence checks to give potential partners confidence in the start-ups on-going commercial viability.

Culture

Start-ups may be run by individuals impatient for progress and unwilling to be governed by someone else’s ‘mindless’ bureaucracy: “We ask for simple things like a business case or cash flow projections or reports and they get resentful. They don’t see why they should have to justify everything!” (Large company manager).

The start-up’s point of view …

How to get in?

While some large firms have very clear points of contact, many do not. The complexity and scale of some large company operations mean that even their own staff are unable to help a start-up contact the right people. “The [large company] people would start every meeting with us looking at their organisation charts to try and work out where they fitted into the company. If they didn’t know who did what, what chance did we have?” (Start-up CEO)

Understanding company roles

It is very hard for the start-ups to work out the different roles of people in a large company. Who is the decision maker? Who influences them? Who will be working on implementing the partnership? Who will be affected by its outcome?

Changing points of contact

Start-ups may start by talking to the large company’s technologists who are likely to be enthusiastic and speak the same language. As they move towards formalising the deal the start-up will have to talk to the procurement and legal teams who may treat them quite differently.

Slow decision cycles

Small start-ups are usually able to make decisions very quickly. Large firms, due to their complexity and multiple layers of management often find it very hard to make decisions at ‘start-up speed’. This can be very frustrating for the start-up.

Power imbalance

The large firm may intentionally or unintentionally abuse its position by drawing out negotiations and attempting to prevent discussions with competitors. This can push the cash-strapped start-up towards accepting a less lucrative deal.

Ignorance of start-ups

Demands made of start-ups by large firms show the lack of awareness of how a start-up operates: “They would ring us up and ask to speak to our Latin America sales director or ask us to train 20,000 of their consultants. Our whole business was six people in one room.” Start-up CEO.

Ways to help make partnerships work

Research shows that companies deal with these issues in a number of ways. Some of the more successful strategies employed are given below grouped under five main headings.

Strategy and business model: The start-up is likely to consider multiple possible application areas for its technology. It can greatly assist negotiations if these can be captured in a roadmap that highlights the various opportunity areas and shows the resources needed for implementation. The start-up should also be aware of three possible outcomes of a partnership: it may help to implement the intended business model(s); it may open new opportunity areas; but it may also restrict future opportunities. The large firm should try to create a roadmap or portfolio map that can be shared with start-ups. This should position the large firm’s technology capabilities and needs (including an assessment of the level of criticality) and indicate different opportunity areas. Depending on the level of criticality the large firm may decide to spread risk by having parallel technology acquisition routes.
The technology: The start-up should make a realistic assessment of the readiness level of its technology and identify tasks and costs associated with preparing it for manufacture – including finding out who owns any complementary resources required. The large firm should use its roadmap to position the start-up’s technology within the broader range of its activities. It should show what complementary resources are needed to bring the technology to market and how this may change over time. It should assess the readiness levels of the start-up’s technology and how much of the technology is tacit (undocumented) versus explicit. The commercial viability of the start-up needs to be monitored bearing in mind how critical the technology is to the large firm.
Company organisation and culture: Start-ups will find it useful to check whether the large company has ever worked with a start-up before. If they lack large company experience themselves they should seek advice from non-executive directors, mentors or investors. Talking to the large firm’s suppliers can help develop a sense of how the larger company works. It is also a good idea to encourage informal interaction between the teams so that the large firm gets a better sense of start-up culture. The large firm should spend as much time as possible helping the start-up to understand the needs, internal processes and culture of the large firm. Process maps can be used to show start-ups how decisions are made. Some firms use a dedicated team or individual champion to act as first point of contact. This can help shield start-ups from unnecessary bureaucracy and smooth communication in both directions.
Setting up the deal: The start-up should find out who is likely to influence and authorise the decision to form a partnership. The start-up should have a clear idea what is really expected from the partnership on both sides, what realistically can be delivered, how things may change over time and what the possible direct and indirect benefits might be. Legal advice should be sought at the outset. Though costs will be incurred, they are likely to be less than fixing problems later. As decisions relating to the partnership are likely to be made in the start-up’s absence, the start-up should make sure their large company ‘champion’ is armed with the start-up’s viewpoint. The large firm should ensure that overarching principles concerning the deal are agreed first before moving on to detailed issues. It is essential to be as open as possible with the start-up about any concerns and to be aware of the start-up’s cash flow position. Working with the start-up on a small-scale, cash-generating project first can be very useful. It will give both sides a feel for how the other operates and might reveal ways the partnership could develop in the future.
On-going management of the deal: The start-up needs to keep in regular contact with its larger partner – not just when there is a problem. Assigning members of the management team to ‘mark’ key contacts at the large firm is one way to receive early warning of any emerging problem areas. Documenting all interactions should be a standard part of any partnership management process in case of later disagreements. Staff in the large firm who are key to the partnership may change roles and strategies and business models can change. Regular reviews of the partnership will help ensure the relationship continues on the best footing. The large firm should ensure time is devoted to managing communication between the partners. The start-up should be kept informed of developments – for example by attending internal conferences – and should be told of impending milestones and their relative importance. If under-performance is noted, the start-up should be informed as soon as possible and help given to address the problem.

These examples are drawn from case study analysis of over 30 partnerships, along with lessons captured from running 12 workshops over the past 4 years with a range of start-ups, large firms and support service providers. The high profile of open innovation as a strategy for firms of all sizes points to the need for managers and entrepreneurs to consider 'partnering capability' as a key skill. As with all capabilities, increased proficiency comes with a willingness to learn, practice and reflect upon experience That last point is very important as few firms seem to get partnering right first time, and many forget the lessons of their own past partnering experiences.

Open innovation, asymmetric partnerships and Japan's ICT industry

2011-10-03T02:47:00.003+01:00

(This is a modified version of a recent post at cambridgetechnopole.blogspot.com)

Last week I went to a talk given at ITEC in Kyoto by Bob Cole from UC Berkeley on the topic of Japanese software. Two key points relating to Bob Cole's talk were:

Japan's ICT and consumer electronics industries were built predominantly on innovative hardware solutions, supported by bespoke software. This hardware focus plays to, and helped build upon, Japanese strengths in designing and manufacturing precision goods (the term often used to describe this is monozukiri - the art of making physical things).
The world of ICT has moved to being much more software intensive. The recent activities of HP and IBM provide ample support for that point. Japanese companies have been losing competitiveness, and do not seem able to make the transition to a more software intensive approach (but caution is needed in terms of causality and correlation there).

During the talk, the question was asked of the Japanese technology managers in the room 'In your development activities, do you start with hardware then bring in software, or is it the other way round, or do you do both together?'. The response was ~80% for hardware first, software second. A lively discussion ensued, part of which focused on Japanese management structures where seniority rules. The older employees are more likely to be hardware specialists, and software will larger be the domain of younger - and hence more junior - engineers. As a result, hardware dominates. If this is the situation (and there are many other factors to consider before leaping too quickly to conclusions) then for Japan’s ICT firms to transform themselves, different approaches are needed. And this is where open innovation fits in.

One idea put forward for addressing the issues highlighted above was for Japanese ICT firms to partner with (or buy) software start-ups based outside Japan and use these external organisations to stimulate internal change. Such partnerships are a well documented form of open innovation and seem to offer very clear synergistic benefits to both partners. However, research shows that getting very large, old, complex firms to partner with small, new, agile start-ups is very challenging. Add to this the extreme strategic, operational and cultural differences between long established, manufacturing focused Japanese ICT firms and, for example, UK or US-based software start-ups, then the management problems are likely to be amplified.

Partnering for collaboration is one thing; expecting culture change within the larger firm as a result of the partnership is a much bigger issue

Business incubation and high growth firms

2011-09-14T09:23:00.003+01:00

NESTA and the Institute for Manufacturing at Cambridge University Engineering Department have just published a review of current knowledge on the role of business incubation in supporting high-growth ventures. A summary of the key findings are given below (as this topic has strong resonance with open innovation) and the full report can be downloaded from the NESTA publication website.

Incubation for Growth: A review of the impact of business incubation on new ventures with high growth potential

Nicola J. Dee, Finbarr Livesey, David Gill and Tim Minshall

Business incubators have proliferated since their emergence over 50 years ago. Over this time business incubation has evolved to include a range of incubation practices. Nonetheless business incubation can deliver critical value to tenants. Contrasting early definitions of incubation where survival of tenants was emphasised, we define incubation as “...a shared office-space facility that seeks to provide its incubatees with a strategic, valueadding intervention system of monitoring and business assistance.” (Hackett, S. M. and Dilts, D.M. (2004b) A Systematic Review of Business Incubation Research. ‘Journal of Technology Transfer.’ 29: 55-82). Our key findings follow the structure of the report.

The proliferation of business incubation over the last 50 years has resulted in diversification of terminology used and types of incubation offered. To help overcome this problem we compared business incubation with two activities sometimes confused with incubation – equity financing and professional services firms. For example, though not as intensive for venture capitalists, incubators implement an entry selection process for tenants. Perhaps more importantly incubators often have a very mixed revenue stream and incentives as a result, strongly encourage peer-to-peer networking, address multiple needs of new ventures without prioritising just one, and offer continual exposure to the incubation environment and services.

Absolute measures of incubation are impractical, but performance indicators are useful. Given the relatively small number of studies and the lack of comparability between them, any conclusions should be treated as indicative at best.

The UK has approximately 300 business incubators supporting around 12,000 businesses (UKBI). Estimates of the direct impact of business incubation by industry associations 2 include between 25-40 supported businesses and between 44-91 jobs per incubator. Many incubators (~60 per cent) also have outreach programmes to support businesses not resident in the incubator.

Indirect incubator effects, e.g. additional jobs and wealth generation from providing products/services to incubator and incubatees, globally range between 0.48-1.5 times the direct impacts of incubation.

Few studies capture the full impact of business incubation, for example taking a measure of incubation impact over the incubation period rather than longer term, and ignoring entrepreneurial learning and subsequent venturesome activity as a result of business failure. Job creation, while a popular metric used to evaluate incubation, is not generally considered a useful measure of incubator value. An emphasis on job creation also contradicts the advice of many investors who are acutely aware of the need to control spending by investee firms, which often means delaying recruitment. Further work is needed to develop appropriate performance indicators for incubation.

In practice, incubation can lead to several outcomes for new ventures. Incubation can impact new ventures through modifying or accelerating the entrepreneurial process of business development. But while incubators have been associated with business acceleration of incubatees, this same process can lead to ‘life support’ which extends the time to business failure. A period of high risk can confront incubatees when leaving the support of an incubator.

Selecting firms with potential for high growth is an uncertain process. A portfolio approach mitigates the risk associated with relying on the performance of a single firm. Across a portfolio of incubator tenants around 23 per cent identify the incubator as important to business performance. ( CSES (2002) ‘Benchmarking of Business Incubators.’ Sevenoaks: Centre for Strategy and Evaluation Services) Over 60 per cent identify the incubator as critical, while just under 17 per cent regard the incubator as unimportant to performance.

Incubators influence new firms by:

• Lending credibility through association, and through shared (and therefore affordable) access to professional facilities and an identifiable and flexible incubation space.

• Offering business support and coaching which are often subsidised e.g. strategic insights, market research etc.

• Providing access to additional resources and talent e.g. finance, legal help.

The incubator draws on its own staff, external consultants, and its existing entrepreneurial support network to provide business support. Peer-to-peer networking is also encouraged.

Matching incubator services to the needs of firms is important. New venture activity and business support needs vary between regions, industries, prior entrepreneurial experience and so on.

Incubators with links to universities are associated with technology firms with higher growth potential, but not all universities have an entrepreneurial culture or are surrounded by a supportive business environment. In addition to technology and facilities, people are a main contribution of universities to entrepreneurial activity.

Rather than cater to all firms, most business incubators have a selection/screening process to target a particular group of firms. This screening process is imperfect, but can be improved through the use of multiple screening dimensions. ( Aerts, K., Matthyssens, P. et al. (2007) Critical role and screening practices of European business incubators. ‘Technovation.’ 27: 254- 267) Nonetheless a selection process can only be imposed if the incubator can afford to turn away potential tenants.

Tenants seem to become dissatisfied with incubator support when the incubation programme is predetermined rather than re-evaluated depending on the changing needs of tenants. The entrepreneurial support mechanisms also fluctuate, with incubators able to offer some continuity.

As incubators become more embedded in a region they tend to become more specialised. A word of caution – while many try and emulate incubation strategies from Boston, Southern California (US) or Cambridge (UK), these regions are also considered atypical and likened to ‘regional incubators’ owing to the amount and maturity of entrepreneurial activity and infrastructure.

Even incubators with similar objectives can have different business models. Business models have changed over time. Since 2005 there has been a reported increase in the cost per job created each year in business incubation in Europe. Some incubators now offer equity finance, and some equity investors offer incubation, with an unclear distinction between both. The challenge for incubators and their funding bodies is to capture some of the value created for incubatees. Generating revenue from services when clients are resource constrained is often not possible without subsidies from public bodies. Corporate funded incubators typically require a strong strategic fit of incubatees with the corporation, which is not appropriate for all ventures. Incubators with mixed funding may encounter principal-agent problems as they attempt to meet multiple objectives.

Capturing value through taking equity in clients introduces delays in revenue and can cause the incubator to behave more like an equity investor by prioritising short-term financial returns rather than longer-term performance. The literature offers little insight on whether incubators could generate better returns for early-stage investments than pure equity investors. Already early-stage investments are associated with poor returns in Europe, especially compared to the US. Further research is needed to understand the strengths and weaknesses of business models for different contexts.

In summary, the evidence we have reviewed indicates business incubation is a valuable tool as part of an entrepreneurial support infrastructure. Incubators deliver the most value when able to respond and adapt to the needs of new ventures. We realise some of our conclusions regarding how business incubation should be monitored challenge some existing norms in this domain. However, the lack of comparability between studies demonstrates how important it is to improve the quality of metrics. Even so any measure of incubation is likely to be incomplete. The impact of incubation on incubatees should extend beyond the incubation period and incubator environment, though measuring this impact could become onerous and time consuming.

While we recognise the variety of business models used and the continuing evolution of the industry, we nevertheless conclude that further research is required for the fundamentals of incubation models – a topic largely neglected in the extant literature – to be properly understood.

The full report can be downloaded by clicking here.

Open innovation, manufacturing, and things you can drop on your foot

2011-09-01T09:45:00.004+01:00

The following post was published on another blog I write on the topic of the Cambridge (UK) high tech business cluster. Feedback on this post have highlighted an interesting open innovation angle to this topic, i.e. does the provision of publicly accessible prototyping and production tools ('industrial commons') support open innovation? If so, what type of resources need to be provided, by whom, and using what business model? Comments on this topic most welcome:

On a recent business trip to California, I met with some of my former students who are now entrepreneurs and investors in Silicon Valley, predominantly working in consumer internet and mobile apps. These sectors are typified by low capital costs, rapid prototyping and customer engagement, flexible business models, scalability, and potentially (and frequently actual) significant returns to investors. But this success prompted thoughts of whether we could be doing more to support entrepreneurship based around creating value from tangible "things you can drop on your toes" as opposed to the more intangible worlds of software and services.

This opens a whole debate that is way above my pay grade. On the one hand there is the rational but complex debate on what manufacturing actually is, its role in an economy and its impact in growth. There is also the less rational debate about it being somehow 'better' to create value from 'real things'. This is an issue of great interest in Japan at the moment, where the culture of monozukuri(making things) underpinned the phenomenal post-war recovery, but which some believe now hinders Japan's ability to renew itself ("A Samurai would never write software" as one Japanese manager put it in a recent article on Japan in The Economist).

But if we put that debate to one side and take the view that there is a role for creating value from addressing customer needs through the provision of physical devices, then we should make sure that 'manufacturing' entrepreneurs have access to the resources they need to get their ideas to market. One of the most common needs is access to prototyping equipment, the cost of which is typically way beyond any individual inventor or start-up company. The provision of publicly accessible tools (a part of what academics sometimes grandly call 'industrial commons') can therefore be a key enabler for manufacturing entrepreneurs.

There are many examples of organisations providing access to such tools (e.g. for life sciences, the Babraham Technology Development Lab, and for advanced engineering, the Hethel Engineering Centre). These organisations typically combine public and private investment and leverage existing infrastructure to provide support to entrepreneurs. But there is still a need to provide advice, a place for experimentation, and a supportive community for those at the very earliest stages of the development of ideas. It was therefore very pleasing - during the same trip to California where almost everything seemed to be web and mobile focused - to meet with the CEO of Tech Shop in San Francisco. Tech Shop provides a great example of how tools can be provided to support manufacturing entrepreneurs at the very early stages of the development of business ideas. As the CEO put it: "We provide access to tools to help people accelerate their projects". This is not a contract R&D service; it is about providing access to tools and support to help people experiment, explore and develop their ideas. Examples of businesses that have been developed through Tech Shop included Square, Solumtech, DripTech, Clustered Systems and Embrace.

And this is why it is so exciting to see that the MakeSpace project is really gaining momentum in Cambridge, and is about to set up in its new home in - very appropriately - an old factory in the city centre.

Open Innovation Research Forum: Fast-tracking open innovation research

2011-04-22T17:13:00.010+01:00

The newly-formed Open Innovation Research Forum (OIRF) held its inaugural meeting in the form of a two-day ‘fast start’ research proposal development workshop. The OIRF workshop – sponsored by the UK Innovation Research Centre and Japan’s Institute for Technology, Enterprise and Competitiveness – brought together 40 representatives of multinationals, open innovation intermediaries, and academics from around the world to discuss the links between geographic location and the successful implementation of open innovation. The workshop ran over two days and took an open approach to identifying the challenges and developing collaborative research proposals for addressing these challenges.
The first day was devoted to capturing the issues that companies feel are most important when trying to implement open innovation in different locations. The workshop kicked-off with four presentations to stimulate discussion. First, attendees were able to hear a summary of a recent UK-IRC survey that as captured the current open innovation practices of 1,200 UK firms. Next, the contrasting experiences of Kodak and Philips were presented, highlighting the role of location in their open innovation strategies. Finally, the role of open innovation in attracting investment to the UK was presented, with particular emphasis being given to the ‘Tech City’ development in London. Attendees then worked in groups to filter the wide range of issues raised by these discussions and select five key questions that, if addressed, would be of direct benefit to companies implementing open innovation and those that support them.
A dinner at King’s College then provided attendees with a chance to network and reflect on the day’s discussions.
The second day was structured around identifying ways in which the key questions identified by the companies on the first day could be addressed. This was done through a process of academics presenting a short, PowerPoint-free summary of their work and preferred research methods, and then matching these with the questions identified by the companies. Groups then spent the afternoon working on developing outline proposals for projects to address these questions. By the end of day, six outline proposals, each involving a minimum of two academic institutions, were developed and presented back to all attendees. The six proposals were:
1. Comparing open innovation best practices in developed countries versus emerging markets
2. Identifying factors influencing successful open innovation implementation
3. Open innovation for corporate growth and renewal
4. Effective intra- and inter-organisation collaborations
5. Developing leadership capabilities for open innovation
6. The role of open innovation in stimulating cluster development
Each of these proposals will now be taken forward and resources sought to run these collaborative projects. In addition, an edited book summarising current knowledge in the area of location and open innovation is being explored, and planning for the next OIRF meeting is already underway.
For further information on this workshop, the projects listed above, or any other matter relating to OIRF, please contact tim.minshall@eng.cam.ac.uk. The OIRF is coordinated by Cambridge University Engineering Department’s Institute for Manufacturing. Further information on the activities of OIRF will soon be published via www.oirf.net.

Getting help with open innovation: The role of intermediaries

2010-12-03T21:08:00.003Z

A year-long research project lead by Dr Letizia Mortara of the University of Cambridge Institute for Manufacturing has examined the role of intermediares in supporting open innovation. The project was undertaken in collaboration with a consortium of industrial and other partners, including: BP, CIRA, Crown Cork, Doosan Babcock, EPSRC, GSK, IXC-UK, NESTA, Oakland, PepsiCo, Quotec and Shell.

Firms increasingly need to collaborate with other businesses in order to introduce new products or services. Such partnerships – known as ‘open innovation' (Chesbrough 2003) – help them gain access to new technologies, ideas or skills they require to keep pace with today's evolving markets and changing customer demands. However, this more collaborative approach is an innovation in itself, and demands a new set of capabilities which many businesses do not possess.

Companies looking for help with open innovation will find numerous organisations offering assistance – from commercial and technical consultancies, to government departments, national and local development agencies, academic networks and university technology transfer offices. These organisations have come to be known as ‘innovation intermediaries'.

This project focused on the ways in which intermediary organisations can help to increase the effectiveness of open innovation and intelligence gathering activities. In particular, it aimed to:

understand the ways in which companies can improve their innovation and technology intelligence activities by engaging with intermediary organisations

provide criteria for companies to support the selection of intermediaries to work with

give guidance to intermediaries on how to improve their services and to organise their business models

The findings of the research have been captured in a report published this month. The report aims to help companies select the most effective source of help with open innovation. It describes the capabilities companies need in order to implement open innovation successfully and the range of assistance offered by different types of innovation intermediaries. It suggests a structured approach to selecting the most appropriate intermediary for a particular company's needs and illustrates this with case studies and examples. The report also aims to help intermediary organisations to present their services more clearly to their clients.

You can download an electronic copy for free by clicking here.

The geography of open innovation: Do what where?

2010-08-08T11:07:00.006+01:00

Simple question: Does anyone know of research that links the implementation of open innovation with the decision on where to locate business operations?

To give this question some context, three research domains are related to this question (though there are of course many more).

Cluster theory: Regional clusters are believed to provide a fertile environment to support innovation. A huge amount has been written by economic geographers on categorising clusters, analysing how they form and evolve, identifying different policy measures that can be used to stimulate cluster development (addressing perceived market 'failures'), the role of inter-firm networks within clusters, etc. A good summary of work in these areas can be found in the 'Handbook of Research on Innovation and Clusters' edited by Charlie Karlsson.
Globalisation of innovation: There's plenty of research looking at the way in which innovation activities - especially those of multinational corporations - are increasingly distributed globally. However, some of this work uses R&D as a proxy for innovation. With the recognition that innovation is much more than just the commercialisation of the outputs of R&D operations, the use of R&D as a proxy for innovation seems to be potentially missing a big part of the picture. There is also plenty of research on the topic of innovation systems at the regional level.
Implementation of open innovation: With the frenzy of interest around open innovation (in all its guises), there is no shortage of how-to guides and useful examples from a wide range of industries and sectors.

However, we haven't yet come across much work that looks at the practicalities of implementing open innovation in a particular location. Specifically, we are looking for research which links the decision to locate some part of a firm within a particular region with the stated aim of implementing open innovation and the activities a firm needs to undertake at that location to ensure successful implementation of open innovation. So, if anyone knows of research which does make this link, we'd really like to hear from you either via the comment box below or via email to tim.minshall@eng.cam.ac.uk.

Three books, open innovation, and Maslow's hammer

2010-07-25T10:19:00.018+01:00

On a recent hot, quiet and remote vacation, I read three books and when I had finished them I found myself pondering the implicit (or explicit) connections between the core theme of each book to open innovation. The three books were:

Matt Ridley: "The Rational Optimist: How Prosperity Evolves"
Carlota Perez: "Technological Revolutions and Financial Capital: The Dynamics of Bubbles and Golden Ages"
Brian Arthur: "The Nature of Technology: What It Is and How It Evolves"

I'm not going to attempt to summarise these very interesting books other than to highlight what I think might be some of the open innovation angle that can be taken from each one (but I am still working on this ..).

Matt Ridley's core message is about the power of the exchange and reproduction of ideas, the trade in goods and services, and innovation as a 'collective phenomenon'. As such the book (to me) seems to push the role of collaboration innovation to the fore and, in fact, raise it to high prominence as an essential component in underpinning our ability to maintain growth across the globe in the face of major social, economic and environmental challenges.

Carlota Perez presents an excellent, structured summary of the patterns that can be observed in technological revolutions. She splits analysis of past revolutions into two broad phases of installation and deployment, and each of these is in turn split into irruption and frenzy, and synergy and maturity. She stresses the difference between financial and production capital in supporting the widespread adoption of the technology. A key message of this book, from an open innovation perspective, is the recognition that technologies are extremely unlikely to be brought to market by firms acting in isolation and that the development of the whole ecosystem - or 'techno-economic paradigm' - is required to support successful diffusion of novel technologies. And this is not a feature only of modern technologies, but something that can be observed in the analysis past technological revolutions such as canals, steel making, railways, automobiles, and many others.

Finally, Brian Arthur's delivers 'an -ology of technology'. He discusses technology in terms of links to natural phenomena, the combining of and building upon existing technologies, and how technologies deepen and develop over time. He also presents an interesting discussion of the links between the evolution of the economy and technologies, and the way in which an economy can be considered as an expression of its technologies. From an open innovation perspective, this book provokes numerous interesting areas for further discussion. Among these, the links between modern technologies, management change and collaboration are interesting. E.g. "[..] the nature of modern technology is bringing a new set of shifts: In the management of businesses, from optimizing production processes to creating new combinations - new products, new functionalities. From rationality to sense-making; from commodity-based companies to skill-based companies; from the purchase of components to the formation of alliances; [..]. Order, closedness, and equilibrium as ways of organizing explanations are giving way to open-endedness, indeterminancy, and the emergence of perpetual novelty" (p210-211).

However, in reading all three of these books and looking for the open innovation links as I have attempted above, I'm not sure whether I have fallen into the trap identified by Abraham Maslow when he stated: "It is tempting, if the only tool you have is a hammer, to treat everything as if it were a nail". So, if anyone else has read these books and has an interest in open innovation, your comments would be welcome.

Key points from IfM's open innovation workshops

2010-05-02T18:21:00.005+01:00

The open innovation workshops organised by the Institute for Manufacturing on 20/21 April attracted delegates representing a range of industry sectors and company sizes, with diverse experiences at implementing (or plans for implementing) open innovation. Ruth Thomson from Cambridge Consultants has kindly written two blogs summarising the key themes discussed at this event, and these can be accessed via the links below:

Two open innovation events in Cambridge in April

2010-03-30T17:33:00.005+01:00

The Institute for Manufacturing (IfM) is organising two workshops on 20th and 21st April 2010 focused on the challenges and opportunities of implementing Open Innovation (OI) from two perspectives:

"Open innovation for small firms: how to set up and manage collaborations with large firms" will look at the challenges for small and start-up companies in forming productive collaborations with large companies.
"Implementing open innovation" is focused at large and multinational companies wanting to understand how to develop the skills, processes, culture and motivation for OI.

Both workshops will draw upon research findings at the IfM's Centre for Technology Management (CTM), revealing ways in which companies collaborate and configure themselves to succeed in OI. They will be illustrated with case studies by experienced practitioners from technology-driven companies that have embraced the OI approach. Facilitated mini-workshops will focus on identifying the key challenges faced by participating companies, sharing best practice and learning from research understandings identified by CTM.

The workshops will be an ideal opportunity for companies to build momentum for the next step along the OI journey, whatever their current stage of development. The evening between the two workshops will also provide an excellent opportunity for participants to share experiences with colleagues who share similar challenges and to identify collaborative opportunities between large and small companies.

For more information, see http://www.ifm.eng.cam.ac.uk/service/events/info/openinnovation.html

We know open innovation is not new ..

2010-03-03T22:44:00.003Z

There's an interesting paper recently published comparing open and closed approaches to innovation in the US steel industry in the 1920s. This contrasts with a comment made in the first post on this blog pointing out that open innovation does seem to have some of the characteristics of a recent management fad. So, I'm interested in finding further documented examples of open innovation going back through industrial history. If you know of any, please add a comment. I'll then collate the responses and attempt to produce a historical timeline of open innovation examples.

Links between cluster development and open innovation

2010-01-28T23:40:00.002Z

As part of the preparation for a talk at the Japanese Cluster Conference 2010, I came across several interesting websites providing data on policies to support cluster formation, cluster / open innovation activities, and sites with slightly more tenuous - but potentially relevant - content. In case these might be of interest to others, I have grouped links to them below. Also the slides used at the conference can be downloaded from here.

Policies for clusters:
UK Department for Business, Innovation and Skills cluster strategy
French Pôles de Compétitivité
European Commission's view on the importance of 'Powerful Clusters'

Everyone wants to be Silicon Valley
Examples of 'Silicon + {geographic feature}'

Open innovation
IfM report on 'How to implement open innovation'
Examples of idea submission websites: P&G and 3M
Examples of open innovation intermediaries: Innocentive and NineSigma.

Corporate R&D and clusters
Examples of companies locating innovation activities within clusters: Nokia and Microsoft
Examples of companies seeking to develop clusters around their R&D facilities: Unilever@Colworth and Philips@Eindhoven

Examples of cluster strategies
Local = Cambridge; Regional = East of England Enterprise Hubs; Cross-border = Eindhoven-Leuven-Aachen Triangle (ELAT)

Networks within the Cambridge cluster
Cambridge Network
ERBI
University of Cambridge Enterprise Network

30 second open innovation survey

2009-10-22T08:19:00.006+01:00

Open innovation researchers at the University of Cambridge Institute for Manufacturing are investigating how people are most likely to gather intelligence. In particular, they are interested in the perceived relevance of scanning published documents versus talking to people through networks of contacts.

An extremely quick survey (1 question) has been set up on-line to capture your personal preferences. It will take you approximately 30 sec. to complete. You can access this by clicking http://www.surveymonkey.com/s.aspx?sm=x2aPoMfu_2bawfXfVo3FMQZw_3d_3d

The researchers would be very grateful if you could fill this in and if you could ask some of you colleagues and contacts to do the same.

New guide highlights ways to introduce open innovation

2009-09-30T14:17:00.003+01:00

Cambridge University’s Institute for Manufacturing (IfM) has produced a new guide to show how other companies can follow in their footsteps.

The report, “How to Implement Open Innovation”, is the result of a two-year study of some of the world’s leading firms and can be downloaded from the IfM's website.

The research team looked at more than 30 major companies from a variety of sectors, including energy, aerospace and defence, software and media, electronics and telecommunications.

It is thought that open innovation could be a way of improving a firm’s ability to create and capture value, by improving the rate and quality of innovation.

Rather than relying on internal resources firms share knowledge and technologies with other companies in a bid to create new commercial opportunities

Report co-author Dr Letizia Mortara, of the IfM’s Centre for Technology Management (CTM), described its purpose: “While Open Innovation is a relatively new phenomenon, it has started to gain traction in businesses across a range of sectors. We wanted to try and find out if there was a framework or guide for other firms to implement Open Innovation and to understand what people involved in its adoption did on a day-to-day basis.

“Philips is a good illustration of OI implementation; it created incubation processes to carry out research into ideas which do not immediately fit within existing businesses, but in time could lead to the introduction of new products.

“But Philips is not the only firm to embrace OI, and others have adopted interesting approaches. Our study provides an overview of a range of current practice and illustrates the challenges firms may face when attempting to implement OI.”

Fellow author Dr Tim Minshall, a senior lecturer at CTM, said: “Open Innovation has already shown it can help firms cope with emerging challenges and create new opportunities

“While not a panacea to all business problems, it can be a positive process. We think the report offers an overview of existing approaches to OI and an outline of how to implement it and some of the main obstacles that need to be overcome.”

Among the guidance contained within the report is how companies can build an open innovation culture, how to develop the necessary skills within the business and how to motivate employees.

Dr Minshall added: “While each company will face different challenges and will have different reasons for pursuing open innovation, the report offers a framework which can be tailored to their needs.”

The report was written by Dr Mortara, Dr Minshall, and Johann Napp of the IfM and Imke Slacik now of McKinsey and Co.

What this blog is about ...

2009-09-30T14:16:00.002+01:00

‘Open innovation’ is a term that has emerged to describe the use of: “[..] inflows and outflows of knowledge to accelerate internal innovation, and expand the markets for external use of innovation [..].” (Chesbrough et al., 2006). Though it has been said to have some of the characteristics of a management fad, at its heart seems to be something that integrates tried and tested collaborative business activities, has the potential to improve the ability of firms to introduce new products and services, but which is very challenging to implement effectively.
This blog aims to provide commentary on the practical challenges of making open innovation work, to highlight new research outputs that help build understanding of open innovation, and to signpost events and organisations that share common interest in making open innovation work.